Product ID:SHELL TURBOT OIL 68, 65605
MSDS Date:07/09/1991
FSC:9150
NIIN:00N000227
MSDS Number: BCDYK

SHELL OIL COMPANY

HEALTH, SAFETY AND ENVIRONMENT
HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461/800-424-9300(CHEMTREC)

Info Phone: 713-241-4819/4141/2252 FAX -6511

Preparer: G.A. VAN GELDER

Cage: 54527

SHELL OIL COMPANY

2463 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

MINERAL OIL,PETRO DISTILLATES, HYDROTREATED (SEVERE) HEAVY

CAS: 64742-54-7

RTECS: PY8035501

Fraction By Weight: 49-99%

OSHA PEL 5MG/M3 OIL MIST(MFR)

ACGIH TLV: 5MG/M3 OIL MIST(MFR)

MINERAL OIL,PETRO DISTILS CATALYTIC DEWAXED HVY PARAFFINIC

CAS: 64742-70-7

RTECS: PY8045501

Fraction By Weight: 0-50%

SOLVENT REFINED CATALYTIC DEWAXED HEAVY PARAFFINIC

RTECS: 9999999ZZ

MINOR ADDITIVES

Fraction By Weight: <1%

STOR/SALVAGE VESSELS. SOAK UP RESIDUE W/ABSORB

RTECS: 9999999ZZ

PROPERLY. FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE.

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50:(ORAL,RAT) >5 G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:BASED ON PROD TESTING, PROD IS
NON-IRRIT. SKIN:BASED ON PROD TESTING, PROD IS NON-IRRIT. PRLNG &
RPTD CONT MAY RSLT IN DISORDERS SUCH AS DERM, OIL
ACNE/FOLLICULITIS. ACCIDENTAL RELS UNDER HIGH PRE SS APPLICATIONS
MAY RSLT IN INJECTION OF OIL INTO SKIN CAUSING LOC NECROSIS.
INHAL:INHAL OF VAPS (GEN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:AT HIGH TEMPS ONLY) OR OIL MIST MAY
CAUSE MILD IRRIT OF UPPER RESP TRACT. INGEST:BASED ON PROD TESTING,
PROD IS CONSIDERED NO MORE THAN SLIGHTLY TOX IF SWALLOWED. SIGNS &
SYMPS:IRRIT AS NOTED ABOVE. NECROSIS MAY BE EVID BY DELAYEDONSET
OF PAIN & TISS DMG FEW HRS FOLLOWING HIGH PRESS INJECTION.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN & RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid:EYES:FLUSH W/WATER FOR @ LST 15 MINS. GET MD. SKIN:REMOVE
W/WATERLESS HAND CLEANER, FOLLOWED BY WASHING W/SOAP & WATER.
REMOVE ALL CONTAM CLTHG. IF MATL INJECTED, GET MED ATTN PROMPTLY TO
PVNT SERIOUS DMG; DO NOT WAIT FOR SYMPS TO DEVEL. INGEST:DO NOT
INDUCE VOMIT. IN GEN, NO TREATMENT IS NEC UNLESS LG QTYS OF PROD
ARE INGESTED. HOWEVER, GET MED ADVICE. INHAL:REMOVE VICTIM TO FRESH
AIR & (SUPDAT)

Flash Point Method:PMCC
Flash Point:400F,204C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2. DO NOT USE
DIRECT STREAM OF WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COOL FIRE EXPOSED CNTNRS W/WATER. MATL
WILL NOT BURN UNLESS PREHEATED. PROD WILL FLOAT ON WATER & CAN BE
REIGNITED ON SURFACE.

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
CAUT JUDGMENT WHEN CLEANING UP LG SPILLS. LG SPILLS:WEAR NIOSH/MSHA
APPRVD RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE
TO DO SO. DIKE & CO NTAIN. REMOVE W/VACUUM TRUCKS/PUMP TO (ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN PRLNG SKIN CONT. LAUNDER CONTAM
CLTHG BEFORE REUSE. PROPERLY DISP OF CONTAM LEATHER ARTICLES, INCL
SHOES, THAT CANNOT BE DECONTAM.
Other Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE VENTILATION. KEEP
AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.

Respiratory Protection:IF EXPOS MAY/DOES EXCEED EXPOS LIMITS USE
NIOSH/MSHA APPRVD ATM-SUPPLYING/AIR-PURIFYING RESPIRATOR FOR
ORGANIC VAPORS & PARTICULATES.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL RESISTANT (NITRILE) GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING TO AVOID SKIN CONTACT,
NITRILE RECOMMENDED.
Work Hygienic Practices:WASH W/SOAP & WATER BEFORE EATING, DRINKING,
SMOKING, USING TOILET FACILITIES.
Supplemental Safety and Health
HAZ DECOMP PROD:GASES WILL EVOLVE WHEN MATL UNDERGOES
PYROLYSIS/COMBUST. CARBON MONOXIDE & OTHER UNIDENTIFIED ORG CMPDS
MAY BE FORMED UPON COMBUST. FIRST AID PROC:PROVIDE OXYGEN IF BRTHG
IS DFCLT. GET MED ATTN. NOTE TO MD:IN GEN, EMESIS INDUCTION IS
UNNEC IN HIGH VISCOSITY, LOW VOLAT PROD, I.E., MOST OILS & GREASES.

HCC:V6
Melt/Freeze Pt:M.P/F.P Text:-5F,-21C
Spec Gravity:0.88 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OIL; SLIGHT HYDROCARBON ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMP PRODS ARE HIGHLY
DEPENDENT ON COMBUST CNDTNS. COMPLEX MIXT OF AIRBORNE SOLID, LIQ,
PARTICULATES &(SUPDAT)

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.